Tactical Distributors

1.866.916.6905

MSM Logo Sticker Small

MSM Logo Sticker Small

Milspec Monkey

#sticker005

Approx 3" x 2.75"
These stickers are made of cut vinyl so if you have not used before they take a smidgn' more effort to apply. First one must peel off making sure the vinyl is all on the sticky tape side. Sometimes the base paper will stick to the vinyl, so try and peel from an alternate angle if the occurs to cleanly separate. Make sure the surface you are applying to is clean then put er' on there. Be sure and press down hard on the vinyl parts so when you pull off the tape, the vinyl will stay on the surface. After tape is pulled, go ahead and push on the vinyl more to get bonus pressure adhesion.

Be the first to review this product


Availability: In stock

$4.00

* Required Fields

Close
Combat Ready
This product is ready and qualified to be used in combat/military operations.
Eco Friendly
This product inflicts minimal or no harm to the environment.
Fire Retardant
This product has fabrics that resist verticle flames, flash fires and have non-melt properties for extreme conditions.
Hydration
This product carries liquid to keep you hydrated.
ITAR
International Traffic In Arms Regulation
- This product is specifically designed, developed, configured, or modified for military application.
- It is under ITAR and Export Control and cannot be exported outside of the U.S.
Keep Cool
This product is for warmer climates to keep cool in extreme conditions.
Keep Warm
This product is for colder climates to keep warm in extreme conditions.
Made in U.S.A.
This product is home grown in the United States of America. It compiles with the Berry Amendment.
Moisture Wicking
This product wicks moisture from the body, keeping the wearer dry.
Stretch
This product incorperates fabrics that stretch to improve mobility and accelerate dry time.
Ventilated
Strategic venting in garment at key points to keep body cool in hot conditions.
Water Proof
This product completely repels water. Keeps components or body dry.
Water Resistant
This product resists rain/water, keeping components or body protected and dry.
Wind Proof
This product blocks wind from penetrating to the body.
Combat Ready
This product is ready and qualified to be used in combat/military operations.
Eco Friendly
This product inflicts minimal or no harm to the environment.
Fire Retardant
This product has fabrics that resist verticle flames, flash fires and have non-melt properties for extreme conditions.
Hydration
This product carries liquid to keep you hydrated.
ITAR
International Traffic In Arms Regulation
- This product is specifically designed, developed, configured, or modified for military application.
- It is under ITAR and Export Control and cannot be exported outside of the U.S.
Keep Cool
This product is for warmer climates to keep cool in extreme conditions.
Keep Warm
This product is for colder climates to keep warm in extreme conditions.
Made in U.S.A.
This product is home grown in the United States of America. It compiles with the Berry Amendment.
Moisture Wicking
This product wicks moisture from the body, keeping the wearer dry.
Stretch
This product incorperates fabrics that stretch to improve mobility and accelerate dry time.
Ventilated
Strategic venting in garment at key points to keep body cool in hot conditions.
Water Proof
This product completely repels water. Keeps components or body dry.
Water Resistant
This product resists rain/water, keeping components or body protected and dry.
Wind Proof
This product blocks wind from penetrating to the body.

Product Description

Approx 3" x 2.75" These stickers are made of cut vinyl so if you have not used before they take a smidgn' more effort to apply. First one must peel off making sure the vinyl is all on the sticky tape side. Sometimes the base paper will stick to the vinyl, so try and peel from an alternate angle if the occurs to cleanly separate. Make sure the surface you are applying to is clean then put er' on there. Be sure and press down hard on the vinyl parts so when you pull off the tape, the vinyl will stay on the surface. After tape is pulled, go ahead and push on the vinyl more to get bonus pressure adhesion.