The ITS Tactical ETA Trauma Kit Pouch was born out of the necessity in developing both a pouch that could hold our Vacuum Sealed Fatboy ETA Trauma Kit, as well as the contents of the kit if the end user needs to break the seal, or wants faster access to individual components.
ITS worked with Zulu Nylon Gear for nearly a year to design what we feel is one of the best medical pouches on the market today. With a simple pull on the handle, the pouch quickly filets open to provide immediate access to your medical components without delay. The new addition of a small 1" section of red Velcro One-Wrap affixed to the color-matched webbing handle can be removed for a lower profile.
The main rear-most pocket provides space large enough to fit our Vacuum Sealed Fatboy ETA Trauma Kit or a complement of other medical items. The two rear wing pockets are large enough to store Decompression Needles, NPAs, or other Airway devices. The flap panel design comes from our ITS Med Insert and allows you to custom configure the shock cord loops to hold whatever you need it to.
The pouch can also be quickly secured by simply pulling back up on the handle and affixing the velcro. Trauma shears can be tucked behind the PALS/MOLLE mounting at the rear of the pouch or attached to the single channel of PALS/MOLLE that run on either side of the exterior of the wings. This channel can also be used to secure a tourniquet, tourniquet pouch, or rescue hook pouches.
We highly recommend augmenting our ETA Kits with the SOFTT-W Tourniquet and optionally adding Molly Stix to make your medical pouch quick releasable!
Warranty: In the unlikely event that a ETA Trauma Kit Pouch should fail due to poor craftsmanship or other defect, ITS will repair or replace as necessary free of charge!
- Lightweight 500d Cordura Construction with 420d Pack Cloth Interior
- Mil-Spec 550 Type III Paracord Zipper Pulls
- Color-Matched Velcro, Webbing and Zippers
- All Edges Feature Binding Tape for Quality Construction
- Exterior Single Side Channels of PALS/MOLLE for Mounting Tourniquets, Tourniquet Pouches, Shear Pouches, or Rescue Hook Pouches
- 1" Color-Matched Webbing Pull Handle w/ Removable 1" Red Velcro One-Wrap to denote Medical Supplies
- Reverse Zippers to Keep the Dirt and Grunge Out
- Exterior Loop Velcro Field for Medical, Blood Type or Unit Identifier Patches (2" Tall x 4" Wide)
- User Replaceable Shock Cord and ITW Nexus CordLoc
- Weight: 4.2 oz.
- Measurements: 7" Tall x 5.25" Wide x 2.5" Deep
- Includes (2) Black Long MALICE Clips for Mounting to PALS/MOLLE (3 Columns x 5 Rows PALS/MOLLE on Rear)
- Includes ITS Med PVC Patch
- Available in Black, Coyote Brown and MultiCam
- Made in the USA (Berry Amendment Compliant)
NOTE: Pouch only. No medical items included
Please fill out the Return Form when sending back packages. RMA Form
Tactical Distributors is committed to providing 100% customer satisfaction. If you are not satisfied with your purchase and wish to return an item within 30 days of receipt, the shipping costs for incorrectly shipped items will be met by Tactical Distributors. Goods which are supplied correctly may be returned within a 30 day period for exchange or refund. Shipping costs for correctly shipped items will be met by the customer. For your convenience, the cost of return shipping will be deducted from your refund balance.
To receive a RMA (Return Merchandise Authorization) number please contact the Customer Service Department. All returns must have an authorization number written on the outside of the box in order to be processed. Returns without an authorization number will be returned to sender.
For the fastest service, call Customer Service at (866)-916-6905 to request a QuickExchange. We'll place an order for your new item right away, and usually ship it the next day. We'll need to charge you the purchase price, but we'll waive the shipping and handling charge for the new item. Once we receive your return, we'll credit you for the cost of the original item.
Please send any products under warranty directly to the manufacturer to expedite the return process. If sent to Tactical Distributors, we will forward it to the manufacturer for their inspection and they alone will make final decision on repair or replacement. Please note that due to health regulations, we cannot accept returned socks or underwear.
Items with serial numbers that are altered or changed will not be accepted for return.
Merchandise must be unworn, and in the original packaging. We'll also accept the return of incorrect or defective merchandise that meets the guidelines below.
Unworn Merchandise: Includes any item that is in new condition, still contains the original tags and is in the original packaging (if any). Returns will not be accepted if item exhibits any obvious signs of wear or is not in the condition in which it was received. All original packaging and materials including boxes, manuals, warranty cards, and any other materials in the original shipment must be returned with your merchandise.
Defective Merchandise: Includes any item that is in new condition, still contains the original tags and is in the original packaging (if any). Returns will not be accepted if item exhibits any obvious signs of wear or is not in the condition in which it was received. All original packaging and materials including boxes, manuals, warranty cards, and any other materials in the original shipment must be returned with your merchandise.
Once your return is received and inspected(usually within 72 hours of receipt), your refund will be processed and a credit will be automatically applied to your credit card within 7 days. Please note that depending on your credit card company, it may take an additional 2-10 business days after your credit is applied for it to post to your account.
Returns After 30 Days
In the event you wish to return an item after the 30-day return period, please contact Robbie Carpenter before making the return. A RMA may be provided by Customer Service for valid reasons; however, the item(s) must be in new condition as shipped with all original product packaging. You should be certain that the item you are purchasing will fit your needs. Ensure that the dimensions, aesthetics and utility of the product is what you need before placing your order. By confirming your order, you indicate your agreement to this policy.
Have any questions, contact Tactical Distributors, we are here to ensure your 100% satisfaction.